If paper becomes jammed, remove the paper according to the following procedure.
<Method 1>
Press and hold the (Feed) button.
The drive motor will start and move slowly for a few seconds, then move faster as long as you hold the button down. This can be repeated as many times as necessary.
If this does not eject the jammed paper, try " Method 2" below.
<Method 2>
Gently open the release cover completely.
Gently pull the paper out of the printer in either direction.
Close the release cover.
Insert a new sheet of paper and print again. <see the FAQ: How to insert paper>
Se a sua pergunta não tiver sido respondida, consultou outras Perguntas mais frequentes?
(Feed) button.
