PT-H110
![]() |
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
How to use the Text Label function
This function allows you to create various labels using the built-in templates.
These templates are available when using 12 mm / 0.47″ wide tape cassettes.
To use the Text Label function, follow the steps below:
Example:
(Template that includes one repeated graphic)
-
Press the [Menu] key.
-
Press the Cursor key (
) to select [Decorative].
-
Press the [OK] key.
[Select Category] is displayed.
-
Press the Cursor key to select [Text].
-
Press the [OK] key.
[Select Design] is displayed.
-
Press the Cursor key (
) until
appears.
-
Press the [OK] key.
[Input Text] is displayed.
-
Clear the text and then enter the text to be printed.
- You cannot set the Font, Size, Style and Frame while entering texts.
-
To clear the text, move the cursor to the right side where you wish to clear, and then press the Backspace key (
/
).
-
To clear all text, press the [Clear] key (
/
). “All Clear” appears.
Press the [OK] key to clear or the Escape key () to cancel.
-
Press the [OK] key.
[Set Label Length] is displayed.
-
Press the Cursor key or the number keys to select your desired label length from [Auto] or 30 – 999 mm (1.2″ - 39.0″).
- Press the Space key to return to the initial setting for “Label Length” mode. The initial setting is [Auto].
- If you set the longer label length than the default ([Auto]), the text label is printed repeatedly within the set length. The text label may not be fully printed depending on the set length.
- The available label length setting changes depending on the number of texts you entered.
-
Press the [OK] key.
[Print] is displayed.To preview labels, press the [Preview] key (
/
) when [Print] is displayed on the LCD.
-
Press the [OK] key.
[Copies:] is displayed. -
Press the Cursor key or the number keys to specify the number of copies within the range of 1 – 9.
- Press the [OK] key.
-
To exit templates and return to the text input screen, do one of following:
-
Press the Escape key (
).
- Press the Cursor key to select [Exit], and then press the [OK] key when [Print] appears.
-
Press the Escape key (
- You cannot save labels created using templates to memory.
- You cannot edit the templates.
- When you access Text Label templates, your most recently printed Text Label template label length is recalled.
Jeśli Twoje pytanie pozostaje bez odpowiedzi, czy sprawdziłaś/sprawdziłeś inne odpowiedzi na często zadawane pytania?
Opinie dotyczące treści
Aby pomóc nam udoskonalać naszą pomoc techniczną, przekaż poniżej swoją opinię.