NX-200

Odpowiedzi na często zadawane pytania i rozwiązywanie problemów

How do I remove the presser foot holder?

Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.
With models equipped with (needle position button), raise the needle by pressing (needle position button) once or twice.

or

Mark

Needle position button
Turn off the sewing machine.

Before replacing the presser foot, be sure to turn off the sewing machine. Otherwise, injuries may occur if a button is accidentally pressed and the machine starts sewing.
Raise the presser foot lever. The presser foot is raised.

Presser foot lever
Press the black button at the back of the presser foot holder.
The presser foot holder releases the presser foot.

Black button

Presser foot holder
Use the screwdriver to loosen the presser foot holder screw.
The presser foot is removed from the presser bar.

Screwdriver

Presser foot holder

Presser foot holder screw

Presser bar