MFC-L6950DW
 |
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
Scan to Email Attachment
Send a scanned document as an email attachment.
- Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use Brother's ControlCenter software.
The Scan to Email feature does not support Webmail services. Use the Scan to Image or Scan to File feature to scan a document or a picture, and then attach the scanned file to an email message.
The machine scans to your default email client.
- Load your document.
- Press
[Scan]. - Swipe left or right to display
[to E-mail]. - Press [to E-mail]. The icon moves to the middle of the Touchscreen and is highlighted in blue.
- Press [to E-mail].
- If the machine is connected over the network, swipe up or down or press
or 
to display the computer where you want to send data, and then press the computer name. If the LCD prompts you to enter a PIN for the computer, enter the four-digit PIN on the LCD, and then press [OK].
- Do one of the following:
- To change the scan settings, press [Options], and then go to the next step.
- To use the default scan settings, press [Start].
The machine starts scanning. If you are using the machine's scanner glass, follow the Touchscreen instructions to complete the scanning job.
To change scan settings, a computer with Brother's Control Center software installed must be connected to the machine.
- To scan both sides of the document (DCP-L6600DW/MFC-L5750DW/MFC-L6800DW/MFC-L6900DW):
- Press [2-sided Scan], and then select the document type.
OptionDescription2-sided Scan: Long Edge
2-sided Scan: Short Edge
- Select the scan settings you want to change:
- [Scan Settings]
- [Scan Type]
- [Resolution]
- [File Type]
- [Document Size]
- [Brightness]
- [Contrast]
- [ADF Auto Deskew]
- [Skip Blank Page]
- [Remove Background Colour]
(available only for the [Colour] and [Grey] options)
To save the settings as a shortcut, press [Save as Shortcut].
- Press [OK].
- Press [Start].The machine starts scanning. If you are using the machine's scanner glass, follow the Touchscreen instructions to complete the scanning job.
Powiązane odpowiedzi na często zadawane pytania
- Change the scan settings for scanning from ControlCenter2 or the SCAN key (For Macintosh)
- Change the scan settings for scanning from ControlCenter4 or the SCAN key (For Windows)
- I cannot find the destination computer on the network when I try to scan a document using the machine's Scan key or control panel.
- Scan to Email Attachment Using ControlCenter4 Home Mode (Windows)
- Scan to Email Attachment Using ControlCenter4 Advanced Mode (Windows®)
- Scan to Email Attachment Using ControlCenter2 (Macintosh)
Jeśli Twoje pytanie pozostaje bez odpowiedzi, czy sprawdziłaś/sprawdziłeś inne odpowiedzi na często zadawane pytania?
Opinie dotyczące treści
Aby pomóc nam udoskonalać naszą pomoc techniczną, przekaż poniżej swoją opinię.
