MFC-L2740DW
|
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
Jam Rear (With Video Instructions)
If the machine's control panel or the Status Monitor displays there is a jam in the back of the machine (Rear), do the following steps.
-
Open the back cover.
-
Pull the blue tabs at the left and right sides toward you to release the fuser cover.
HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down touching them.
-
Use both hands to gently pull the jammed paper out of the fuser unit.
-
Close the fuser cover. Make sure the blue tabs at the left and right sides lock into place.
-
Close the back cover until it locks in the closed position.
If the paper is often jammed at the back of the machine, open the back cover and try printing documents.
Powiązane odpowiedzi na często zadawane pytania
Jeśli Twoje pytanie pozostaje bez odpowiedzi, czy sprawdziłaś/sprawdziłeś inne odpowiedzi na często zadawane pytania?
Czy zapoznałaś/zapoznałeś się z podręcznikami?
Jeśli potrzebujesz dalszej pomocy, skontaktuj się z działem obsługi klienta firmy Brother:
Powiązane modele
DCP-L2500D, DCP-L2520DW, DCP-L2540DN, DCP-L2560DW, MFC-L2700DN, MFC-L2700DW, MFC-L2720DW, MFC-L2740DW
Opinie dotyczące treści
Aby pomóc nam udoskonalać naszą pomoc techniczną, przekaż poniżej swoją opinię.