MFC-L8650CDW

Odpowiedzi na często zadawane pytania i rozwiązywanie problemów

Odpowiedzi na często zadawane pytania i rozwiązywanie problemów

Clean the laser scanner windows.

Follow the steps below to clean the inside of the machine:
 

  1. Press and hold down Power to turn the machine off.
  2. Press the front cover release button and pull open the front cover.

      Open_front_cover
  3. Hold the blue handle of the drum unit. Pull the drum unit out until it stops.

      Pull_drum
  4. Turn the blue lock lever (1) at the left of the machine counterclockwise to the release position. Holding the blue handles of the drum unit, lift the front of the drum unit and remove it from the machine.

      Lock_lever_counterclockwise
  5. Wipe the four scanner windows (1) with a dry, soft, lint-free cloth.

      Wipe_scanner
  6. Make sure the blue lock lever (1) is in the release position as shown in the illustration.
    Lock_lever_release_position
  7. Gently slide the drum unit into the machine until it stops at the blue lock lever.

      Slide_drum
  8. Turn the blue lock lever (1) clockwise to the lock position.

      Lock_lever_clockwise
  9. Push the drum unit in until it stops.

      Push_drum
  10. Close the front cover of the machine.
  11. Turn on the power switch.

Jeśli Twoje pytanie pozostaje bez odpowiedzi, czy sprawdziłaś/sprawdziłeś inne odpowiedzi na często zadawane pytania?

Czy zapoznałaś/zapoznałeś się z podręcznikami?

Jeśli potrzebujesz dalszej pomocy, skontaktuj się z działem obsługi klienta firmy Brother:

Opinie dotyczące treści

Aby pomóc nam udoskonalać naszą pomoc techniczną, przekaż poniżej swoją opinię.

Krok 1: Na ile informacje na tej stronie były dla Ciebie pomocne?

Krok 2: Czy chcesz dodać własne komentarze?

Prosimy pamiętać, że niniejszy formularz służy wyłącznie do wyrażania opinii.