MFC-J6530DW

Vanlige spørsmål og feilsøking

Vanlige spørsmål og feilsøking
  • Dato: 10.04.2017
  • ID: faq00003017_502

Copy an ID Card

Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original card size.

  • Make sure the paper size is set to A4 or Letter.

  • You may copy an identification card to the extent permitted under applicable laws. For more information, see the Product Safety Guide.

MFC-J3530DW/MFC-J6530DW

  1. Place your identification card face down near the upper-left corner of the scanner glass.
    1. 3 mm or greater (top, left)
    2. 207 mm
    3. 145 mm
    4. scannable area
  2. Press [Copy].
  3. Enter the number of copies in one of the following ways:
    • Press [-] or [+] on the Touchscreen.
    • Press to display the keyboard on the Touchscreen, and then enter the number of copies using the Touchscreen keyboard. Press [OK].
    • Enter the number of copies using the dial pad.
  4. Press [Options]>[Page Layout]>[2in1(ID)].
  5. Read and confirm the displayed list of settings you have selected. When you have finished changing settings, press [OK].
  6. Press [Mono Start] or [Colour Start].
    The machine starts scanning one side of the identification card.
  7. After the machine has scanned the first side, turn over the identification card and press [Continue] to scan the other side.

MFC-J3930DW/MFC-J6930DW/MFC-J6935DW

  1. Place your identification card face down near the upper-left corner of the scanner glass.
    1. 3 mm or greater (top, left)
    2. 207 mm
    3. 145 mm
    4. scannable area
  2. Press [Copy].
  3. Enter the number of copies in one of the following ways:
    • Press [-] or [+] on the Touchscreen.
    • Press to display the keyboard on the Touchscreen, and then enter the number of copies using the Touchscreen keyboard. Press [OK].
    • Enter the number of copies using the dial pad.
  4. Press [Options]>[Page Layout]>[2in1(ID)].
  5. Read and confirm the displayed list of settings you have selected. When you have finished changing settings, press [OK].
  6. Press [Mono Start] or [Colour Start].
    The machine starts scanning one side of the identification card.
  7. After the machine has scanned the first side, turn over the identification card and press [Continue] to scan the other side.

Hvis spørsmålet ditt ikke ble besvart, har du sjekket andre vanlige spørsmål?

Har du sjekket i brukerveiledningene?

Hvis du trenger ytterligere hjelp, kan du ta kontakt med Brothers kundeservice:

Beslektede modeller

MFC-J6530DW, MFC-J6930DW, MFC-J6935DW

Tilbakemelding om innhold

Du kan hjelpe oss å forbedre kundestøtten vår ved å gi tilbakemelding nedenfor.

Trinn 1: Hvordan synes du informasjonen på denne siden hjelper deg?

Trinn 2: Ønsker du å legge til noen kommentarer?

Merk at dette skjemaet kun benyttes for tilbakemeldinger.

Send