DCP-340CW

Vanlige spørsmål og feilsøking

Glossy Paper does not feed correctly. What can I do?

Using a thicker glossy paper than the specified thickness is easy to cause this problem.

To correct the feeding problem, add more paper to the paper tray. If the problem has not improved, check the following steps.

Step1. Check your paper

Refer to "User's Guide" in the Manuals section for information on the Brother machine's capacity for glossy paper. To get the best print quality, we suggest using Brother Premium Glossy Paper.

Step2. Verify that the paper is loaded correctly

The coated side of glossy paper is shiny. Avoid touching the shiny (coated) side. Load glossy paper with the shiny side facing down.
If you are using Brother Premium Glossy Paper, loading the Brother glossy paper with the instruction sheet (support sheet provided in the paper packaging) at the bottom of the stack also helps with this problem.

Step3. Clean the Paper Pick-up Roller

NOTE: Illustrations shown below are from the representative product and may differ from your Brother machine.

Pull the paper tray completely out of the machine.
Unplug the machine from the AC power outlet and open the Jam Clear Cover at the back of the machine.
Clean the Paper Pick-up Roller with isopropyl alcohol on a cotton swab.
Close the Jam Clear Cover. Make sure the cover is closed properly.
Put the paper tray firmly back in the machine.
Re-connect the power cord.