DCP-L8410CDW

Vanlige spørsmål og feilsøking

Vanlige spørsmål og feilsøking

Paper is Jammed Inside the Machine

If the machine's control panel or the Status Monitor indicates that there is a jam inside the machine, follow these steps:

  1. Press the front cover release button and pull open the front cover.
  2. Hold the drum unit's green handle. Pull the drum unit out of the machine until it stops.
  3. Turn the green lock lever (1) counterclockwise until it locks in the release position. Holding the green handles of the drum unit, lift the front of the drum unit and remove it from the machine.
    IMPORTANT

    Hold the green handles of the drum unit when you carry it. DO NOT hold the sides of the drum unit.

  4. Pull out the jammed paper slowly.
    NOTE
    To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations.
  5. Make sure the green lock lever (1) is in the release position, as shown in the illustration.
  6. Gently slide the drum unit into the machine until it stops at the green lock lever.
  7. Turn the green lock lever clockwise to the lock position.
  8. Using the green handle, push the drum unit back into the machine until it locks in place.
  9. Close the machine's front cover.

Hvis spørsmålet ditt ikke ble besvart, har du sjekket andre vanlige spørsmål?

Har du sjekket i brukerveiledningene?

Hvis du trenger ytterligere hjelp, kan du ta kontakt med Brothers kundeservice:

Beslektede modeller

DCP-L8410CDW, MFC-L8690CDW, MFC-L8900CDW, MFC-L9570CDW(T)

Tilbakemelding om innhold

Du kan hjelpe oss å forbedre kundestøtten vår ved å gi tilbakemelding nedenfor.

Trinn 1: Hvordan synes du informasjonen på denne siden hjelper deg?

Trinn 2: Ønsker du å legge til noen kommentarer?

Merk at dette skjemaet kun benyttes for tilbakemeldinger.