VC-500W

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing

How do I load/change the roll cassette?

Loading the Roll Cassette

  1. Unpack the roll cassette and remove the pull-tab in the direction shown by the arrows.

    Roll cassette

  2. Insert the roll cassette into the slot at the back of your Label Printer until it locks into place as shown in the illustration. Your Label Printer ejects a small piece of paper when each roll cassette is used for the first time, to complete the loading process.

    Inserting the roll cassette
     
  3. The cassette button's LED stops blinking and remains lit when loading is complete.

    Roll cassette installation complete
     

Removing the Roll Cassette

  1. Press and hold the cassette button.

    Removing the Roll Cassette 1
     
  2. When the cassette button's LED is off, you can safely remove your roll cassette.
    To remove the roll cassette, lift it up slightly and away from your Label Printer.
    Removing the Roll Cassette 2
     

    Do not remove the roll cassette while the cassette button LED is lit or blinking. Doing so may cause damage. Be sure to press the roll cassette button before removing the roll cassette.

Staat het antwoord op uw vraag er niet bij, kijkt u dan eerst bij de andere vragen:

Heeft u de beschikbare handleidingen bekeken?

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.

Verwante modellen

VC-500W

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.

Stap 1: is de informatie op deze pagina nuttig voor u?

Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.