CM600
 |
Veelgestelde vragen en probleemoplossing |
The mat cannot be fed.
Possible Causes (or Results)
Case1 : There is an obstruction around the slot at the back of the machine.
Case2 : The surface where the machine is installed is uneven.
Solutions
----- Case1 -----
Maintain space around the slot at the back of the machine so that the mat can be fed out.
 |
(1) USB Port (2) Slot (3) DC Power Jack |
----- Case2 -----
Place the machine on a flat, even surface.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
