CM600
 |
Veelgestelde vragen en probleemoplossing |
The mat is fed in at an angle.
Possible Causes (or Results)
Case1 : The mat was inserted into the feed slot at an angle.
Case2 : The corners of the mat are deformed (bent).
Solutions
----- Case1 -----
Press the “Feed” button 
to feed out the mat, and then re-insert it straight in.
----- Case2 -----
Replace the mat with a new one.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
