XL-3600
Veelgestelde vragen en probleemoplossing |
Why does the upper thread keep breaking?
There could be several reasons why the upper thread keeps breaking.
- The upper thread could be installed incorrectly.
Rethread the machine according to the instructions in the manual.
Please refer to "Upper threading" of "Preparation" category.
- The upper thread tension could be set too tight.
Set the tension to the basic thread tension setting or less.
- Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool.
One Point Advice Place a spool of thread on a spool pin.
- The combination of needle size, thread size, and fabric is incorrect.
Be sure to use the correct needle and thread size for the fabric you are sewing.
(Example: Denim-size 16 needle and 40-50heavy-duty threads).
One Point Advice Combination of fabric, thread and needle
Verwante modellen
BC-2100/2300, BC-2500, CS10, CS120WT, CS70, CS-8060, CS-8120, DS-120, DS-140, FS100WT, FS-20, FS-40, FS60, FS60s, FS70WT, FS70WTs, Innov-is 10/10A, Innov-is 100, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 1500D/1500, Innov-is 150SE/ 150, Innov-is 20/20LE, Innov-is 200, Innov-is 2200, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 350SE, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 5000, Innov-is 55, Innov-is 550SE/ 550, Innov-is 55FE, Innov-is 600, Innov-is 900, Innov-is 950, Innov-is 955, Innov-is I, Innov-is Ie, KD40, KE20, LS-2125, NX-200, NX-2000, NX-400Q/400, NX-600, SuperGalaxie 3000/3000C/3000D/3100D, XL-2120/2220/2230, XL-2600/2610/2620, XL-3500/ 3510/3520, XL-3600