ADS-1700W

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing
  • Datum: 13-03-2023
  • Nummer: faq00100308_504

Upload Scanned Data to a Mapped Network Drive (CIFS) Server

To upload scanned data directly to a folder on a Mapped Network Drive (CIFS) server, you must set up a Scan to Network Profile.
  1. Load your document.
  2. Press or to display [to Network], and press it.
  3. Press or to select one of the Network server profiles listed.
  4. If the Scan to Network profile is not complete, press [Options]. Configure the following settings, and then press [OK]:
    • [2-sided Scan]
    • [Scan Type]
    • [Resolution]
    • [File Type]
    • [Document Size]
    • [File Size]
    • [Edge Fill For Plastic Card]
    • [Skip Blank Page]
    • [Advanced Settings]
    • To configure other settings, press [Advanced Settings].
    • To save the settings as a shortcut, press [Save as Shortcut].
    • If signed PDF was selected from the [File Type] drop-down list, you must configure the certificate settings using Web Based Management.
    • [Edge Fill For Plastic Card] is only available when scanning from the Card Slot.
  5. Press [Start].

    The LCD displays the message [Connecting]. When the connection to the Network server is successful, the machine starts scanning.

Verwante vragen

Staat het antwoord op uw vraag er niet bij, kijkt u dan eerst bij de andere vragen:

Heeft u de beschikbare handleidingen bekeken?

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.

Verwante modellen

ADS-1700W

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.

Stap 1: is de informatie op deze pagina nuttig voor u?

Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.

Verzenden