MFC-7860DW

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing
  • Datum: 04-02-2011
  • Nummer: faq00002411_011

Cover is Open

Check the solution applicable for your case.

NOTE: Illustrations shown below are from representative product and may differ from your Brother machine.

 

Case 1: The front cover is not completely closed.
Close the front cover of the machine.

front cover

  • If your brother machine doesn't have an Automatic Document Feeder (ADF), go to Case 4.
  • If your Brother machine has an ADF, go to Case 2.

Case 2: The ADF cover is not completely closed.
Make sure that the ADF cover of your machine is completely closed.

ADF cover

Case 3: The ADF is open while loading a document.
Close the ADF cover of the machine, then press Stop/Exit.

 

Case 4: The fuser cover is not completely closed or paper was jammed in the back of the machine when you turned on the power. 
Make sure paper is not jammed inside the back of the machine, and then close the fuser cover (1) and press Start.

Fuser cover





 

 

Staat het antwoord op uw vraag er niet bij, kijkt u dan eerst bij de andere vragen:

Heeft u de beschikbare handleidingen bekeken?

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.

Verwante modellen

DCP-7055, DCP-7055W, DCP-7060D, DCP-7065DN, DCP-7070DW, MFC-7360N, MFC-7460DN, MFC-7860DW

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.

Stap 1: is de informatie op deze pagina nuttig voor u?

Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.

Verzenden