PDS-6000

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing
  • Datum: 06-04-2015
  • Nummer: faq00000261_057

Clean the scanner

A spot of dirt or correction fluid on the glass strip may cause poor-quality scans. Clean the inside of the scanner if a vertical line appears in the scanned data or if areas are missing in the scanned data.

 

Follow the steps below to clean the inside of your scanner.

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

  1. Unplug the machine from the AC power outlet (electrical socket).
     
  2. Open the Top Cover (1) and the ADF Cover (2).

    Open Top Cover and ADF cover

     

  3. In the ADF unit, clean the glass strips (1) and feed rollers (2) with a soft lint-free cloth moistened with water.

    Clean glass strips and feed rollers

     

  4. Press and hold the buttons (1) on the inside of the ADF Cover and then pull the Reverse Roller Cover (2) down.

    Pull Reverse Roller Cover down

     

  5. Pinch the Reverse Roller and pull it out of the machine.

    Pinch Reverse Roller and pull it out of machine

     

  6. Clean the Reverse Roller with a soft lint-free cloth moistened with water.
     
  7. Pinch the Reverse Roller and reinstall it in the machine.
     
  8. Securely close the Reverse Roller Cover until the hooks snap into the ADF Cover.
     
  9. Slide the document guides as far apart as possible and pull the Roller Cover (1) down.

    Pull Roller Cover down

     

  10. Pinch the Pick-up Roller and pull it out of the machine.

    Pinch Pick-up Roller and pull it out of machine

     

  11. Pull the blue hook on the Separation Roller down.

    Pull blue hook on Separation Roller down

     

  12. Pinch the Separation Roller and pull it out of the machine.

    Pinch Separation Roller and pull it out of machine

     

  13. Clean the Pick-up Roller and the Separation Roller with a soft lint-free cloth moistened with water.
     
  14. Pinch the Separation Roller and reinstall it in the machine.
     
  15. Lift the blue hook that you pulled down in the STEP 11.

    Lift blue hook that you pulled down in STEP 11

     

  16. Pinch the Pick-up Roller and reinstall it in the machine.
     
  17. Close the Roller Cover (1).

    Close Roller Cover

     

  18. Close the ADF Cover and the Top Cover.
     
  19. Plug the power cord back into the AC power outlet (electrical socket).

In addition to cleaning the glass strips with a non-flammable glass cleaner, run your fingertip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, scan a document after each cleaning attempt.

Vertical line

right arrow

Vertical line is gone
When there is a spot of dirt or correction fluid on the glass strip the scanned sample shows a vertical line.   After the glass strip is cleaned the vertical line is gone.

 

Staat het antwoord op uw vraag er niet bij, kijkt u dan eerst bij de andere vragen:

Heeft u de beschikbare handleidingen bekeken?

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.

Verwante modellen

PDS-5000, PDS-6000

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.

Stap 1: is de informatie op deze pagina nuttig voor u?

Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.

Verzenden