MFC-L3710CW

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing
  • Datum: 20-12-2018
  • Nummer: faq00000110_518

Set Sleep Mode Countdown

The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep Mode, it acts as though it is turned off. The machine will wake up and start printing when it receives a print job or a fax. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
  • You can choose how long the machine must be idle before it goes into Sleep Mode.
  • The timer will restart if any operation is carried out on the machine, such as receiving a print job.

DCP-L3510CDW/DCP-L3517CDW

  1. Press Menu.
  2. Press or to display the [General Setup] option, and then press OK.
  3. Press or to display the [Ecology] option, and then press OK.
  4. Press or to display the [Sleep Time] option, and then press OK.
  5. Enter the length of time the machine (maximum 50 minutes) is idle before entering Sleep Mode, and then press OK.
  6. Press Stop/Exit.

DCP-L3550CDW/MFC-L3710CW/MFC-L3730CDN/MFC-L3750CDW/MFC-L3770CDW

  1. Press [Settings]>[All Settings]>[General Setup]>[Ecology]>[Sleep Time].
  2. Enter the length of time (maximum 50 minutes) the machine will remain idle before entering Sleep Mode, and then press [OK].
  3. Press .

Staat het antwoord op uw vraag er niet bij, kijkt u dan eerst bij de andere vragen:

Heeft u de beschikbare handleidingen bekeken?

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.

Verwante modellen

DCP-L3510CDW, DCP-L3550CDW, MFC-L3710CW, MFC-L3730CDN, MFC-L3750CDW, MFC-L3770CDW

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.

Stap 1: is de informatie op deze pagina nuttig voor u?

Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.

Verzenden