MFC-L9570CDW

Preguntas frecuentes y Solución de problemas

Preguntas frecuentes y Solución de problemas

Paper is Jammed Inside the Machine

If the machine's control panel or the Status Monitor indicates that there is a jam inside the machine, follow these steps:

  1. Press the front cover release button and pull open the front cover.
  2. Hold the drum unit's green handle. Pull the drum unit out of the machine until it stops.
  3. Turn the green lock lever (1) counterclockwise until it locks in the release position. Holding the green handles of the drum unit, lift the front of the drum unit and remove it from the machine.
    IMPORTANT

    Hold the green handles of the drum unit when you carry it. DO NOT hold the sides of the drum unit.

  4. Pull out the jammed paper slowly.
    NOTE
    To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations.
  5. Make sure the green lock lever (1) is in the release position, as shown in the illustration.
  6. Gently slide the drum unit into the machine until it stops at the green lock lever.
  7. Turn the green lock lever clockwise to the lock position.
  8. Using the green handle, push the drum unit back into the machine until it locks in place.
  9. Close the machine's front cover.

¿Ha revisado los manuales?

Si necesita asistencia, contáctese con el servicio al cliente de Brother:

Modelos relacionados

MFC-L9570CDW

Comentarios sobre el contenido

Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.

Paso 1: ¿Cómo lo ayudó la información en esta página?

Paso 2: ¿Quiere agregar otros comentarios?

Observe que este formulario solo se utiliza para comentarios.