TJ-4020TN
![FAQ e Risoluzione dei problemi FAQ e Risoluzione dei problemi](/g/b/shared/img/module/icon_question_33.png) |
FAQ e Risoluzione dei problemi |
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
Follow the instructions below:
-
Turn off the printer.
-
Press and hold the Pause button, and then turn on the printer.
-
For the Black Mark Sensor
Release the button when the LED is lit in green/amber (5 times) after the green LED blinks five times alternately.
For the Gap Sensor
Release the button when the LED is lit in red/amber (5 times) after the green/amber LED blinks five times alternately.
You can also calibrate by using the BPM (Brother Printer Management Tool).
Se la domanda non ha trovato risposta, provare a controllare altre FAQ.
Sono stati consultati i manuali?
Per richiedere ulteriore assistenza, contattare il servizio assistenza clienti Brother:
Feedback sui contenuti
Di seguito è possibile fornire il proprio feedback che ci consentirà di migliorare il servizio assistenza.