CM600
![FAQ e Risoluzione dei problemi FAQ e Risoluzione dei problemi](/g/b/shared/img/module/icon_question_33.png) |
FAQ e Risoluzione dei problemi |
There are deep cuts completely through the mat.
Possible Causes (or Results)
Case1 : The blade extension from the blade holder is too much.
Case2 : The cutting pressure (“Cut Pressure”) is incorrect.
Solutions
----- Case1 -----
Remove the holder from the carriage, and then adjust the blade extension.
![img](/g/b/img/faqend/faqh00000703_000/eu_ot/en/34278/faqh702_fig0001.gif)
(1) Turn to the left to decrease the blade extension.
(2) Turn to the right to increase the blade extension.
>> For details, see “Adjusting the Blade Extension”.
----- Case2 -----
Adjust the setting for “Cut Pressure” in the settings screen.
![image image](/g/b/img/faqend/faqh00000703_000/eu_ot/en/1012756/faqh702_fig1001.gif)
>> For details, see “Adjusting the Blade Extension”.
>> For details, see “Settings for Specific Functions”.
Se la domanda non ha trovato risposta, provare a controllare altre FAQ.
Sono stati consultati i manuali?
Per richiedere ulteriore assistenza, contattare il servizio assistenza clienti Brother:
Modelli correlati
CM260, CM300, CM600, CM700, CM840, CM900
Feedback sui contenuti
Di seguito è possibile fornire il proprio feedback che ci consentirà di migliorare il servizio assistenza.