HL-7050N
 |
FAQ e Risoluzione dei problemi |
Printer does not recognize the HDD/Compact Flash.
Make sure of the following points:
- If you are using the HD-6G/EX, make sure that the HDD cable is connected correctly and that you are using the appropriate cable.
- Make sure that the HDD/Compact Flash is installed correctly.
- Make sure that the installed HDD/Compact Flash is formatted correctly.
To format the compact Flash or HDD correctly, follow these steps:
- Press the '+' or '-' keys until 'SETUP' is displayed.
- Press the 'SET' button.
- Press the '+' key until 'DELETE STORAGE' is displayed.
- Press the 'SET' button.
- Press the '+' key until 'FORMAT(CF)' is displayed (if you are using a HDD select the HDD option 'FORMAT(HD)')
- Press the 'SET' button
- Press 'SET' to acknowledge the 'OK?'.
- The Compact Flash or HDD memory will now be formatted.
Turn off the printer. Wait a few seconds, and then turn it on again.
If this error message appears again, replace the HDD/Compact Flash with a new one.
Feedback sui contenuti
Di seguito è possibile fornire il proprio feedback che ci consentirà di migliorare il servizio assistenza.
