HL-4070CDW

FAQ e Risoluzione dei problemi

FAQ e Risoluzione dei problemi

"JAM DUPLEX" error appears on the LCD. What should I do?

If a paper jam occurs inside the duplex unit, follow these steps:

 

  1. Pull the paper tray completely out of the printer and check inside the printer.
  2. If paper is not caught inside the printer, check underneath the paper tray.

     

    Do not put the paper tray back in at this point.

     
  3. If the paper is not caught in the paper tray, open the back cover.
  4. Push the gray lever on the left hand side (1) to the right.

    After you have just used the printer, some internal parts of the printer will be extremely hot. Wait for the printer to cool down before you touch the internal parts of the printer.

     
  5. Pull out the jammed paper slowly.
  6. Reset the gray lever on the left hand side (1) back to the original position.
  7. Fully close the back cover.

     

  8. Put the paper tray back in the printer.

     

 

Se la domanda non ha trovato risposta, provare a controllare altre FAQ.

Sono stati consultati i manuali?

Per richiedere ulteriore assistenza, contattare il servizio assistenza clienti Brother:

Modelli correlati

HL-4050CDN, HL-4070CDW

Feedback sui contenuti

Di seguito è possibile fornire il proprio feedback che ci consentirà di migliorare il servizio assistenza.

Passo 1: le informazioni contenute in questa pagina sono risultate utili?

Passo 2: si desidera aggiungere un commento?

Questo modulo viene utilizzato esclusivamente con finalità di feedback.