Modello fuori produzione. Questa pagina non è più aggiornata.

DCP-4020C

FAQ e Risoluzione dei problemi

FAQ e Risoluzione dei problemi
  • Data: 21/08/2009
  • ID: faq00000075_000

I'm using Windows. I tried to install the MFL-Pro Suite Software (MFC Software Suite) from the CD-ROM, but the installation failed and now I can not remove the portions that did install. What can I do?

The issue may have happened if you clicked the Next button after you finished installing the PaperPort®  software. You should wait until the MFL-Pro Suite (MFC Software Suite) installer starts.

Please uninstall the driver and the MFL-Pro Suite as follows:

 


STEP1: How to uninstall the driver
  1. Please click here to download the Uninstall Tool to remove the drivers.

  2. The Brother End-User License Agreement will appear. If you agree to the terms, click I ACCEPT.

  3. "File Download" will appear. Click SAVE.

  4. "Save as" will appear. From the "SAVE IN" drop down, click DESKTOP. Then, click SAVE to save the uninstaller on your Desktop. This will begin the download of the Uninstall Tool to your Desktop.

  5. Once the download is complete, "Download complete" may appear. If it does appear, click OPEN. If it does not appear, go to the DESKTOP and double click DelInf_x.EXE (ZIP is on the icon and .exe may appear at the end of the name).

  6. "ZIP Self Decompression" appears. Click DECOMPRESS.

  7. A message that the process was successful will appear. Click OK.

  8. Go to your Desktop and locate the folder named "Delinf" and double click to open.

  9. Double click the DelInf32 (.exe may appear at the end of the name) icon. "Brother MFC Uninstaller" will appear.

DO NOT double click DelInf_x.EXE with ZIP on the icon.


  1. Verify your model appears in the box under "Please select the MODEL" and select your connection type (USB or Parallel) under "Please select connection type". Then, click OK.

  2. "Complete" will appear. Click OK.

  3. Restart the computer. The Brother Drivers have now been removed.

  4. Unplug the power cord of the Brother machine and the USB or Parallel cable before starting the Reinstallation Steps below.

If you are a Windows 95/ 98/ 2000 user, this procedure deletes both the USB driver and Parallel driver even though you selected only one.

 

STEP2: How to uninstall "MFL-Pro Suite (MFC Software Suite)"

  1. In case you can't re-install the software:

    1. Please click here to download the tool and save it on your PC.
    2. Double click the downloaded file Dlinstrg.exe and run the program.

  2. In case you can't uninstall the software to reinstall it:

    1. Please click here to download the tool and save it on your PC.
    2. Double click the downloaded file DELREG.exe and run the program.

Now, re-install the driver and MFL-Pro Suite (MFC Software Suite) from the CD-ROM following the instructions in the quick setup guide.
To download the Quick Setup Guide, please go to the download section.

Se la domanda non ha trovato risposta, provare a controllare altre FAQ.

Sono stati consultati i manuali?

Per richiedere ulteriore assistenza, contattare il servizio assistenza clienti Brother:

Modelli correlati

DCP-4020C, MFC-4820C, MFC-580, MFC-590, MFC-890, MFC-9030, MFC-9070, MFC-9160, MFC-9180, MFC-9660, MFC-9760, MFC-9880

Feedback sui contenuti

Di seguito è possibile fornire il proprio feedback che ci consentirà di migliorare il servizio assistenza.

Passo 1: le informazioni contenute in questa pagina sono risultate utili?

Passo 2: si desidera aggiungere un commento?

Questo modulo viene utilizzato esclusivamente con finalità di feedback.

Invia