MFC-J3720

FAQs & Troubleshooting

FAQs & Troubleshooting

Forward a fax to another fax machine when my machine has a mechanical problem.

You can transfer faxes in the memory of your machine if one of the following messages is displayed on the LCD:

 

  • Unable to Clean XX (Clean Unable XX)
     
  • Unable to Initialize XX (Init Unable XX)
     
  • Unable to Print XX (Print Unable XX)
     
  • Unable to Scan XX (Scan Unable XX)

 

  1. Press Cancel(Cancel) to interrupt the error.
  2. Press Settings(Settings).
     
  3. Press All Settings.
     
  4. Press the Up or Down arrow to display Service.
     
  5. Press Service.
     
  6. Press Data Transfer.
     
  7. Press Fax Transfer.
     
  8. Do one of the following:

     

    • If the Touchscreen shows No Data, there are no faxes left in the machine's memory.
      Press Close, and then press Home(Home).
    • Enter the fax number to which faxes will be forwarded.
  9. Press Fax Start.
  • If you have not set up your Station ID, you cannot enter fax transfer mode. Click here to see how to set up the Station ID.
  • You can send the Fax Journal report to another fax machine.
    Press Settings(Settings) and choose All Settings => Service => Data Transfer => Report Transfer in Step 2.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J2510, MFC-J3520, MFC-J3530DW, MFC-J3720, MFC-T4500DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.