Clean the paper pick-up roller

Follow the procedure below to clean the paper pick-up roller.

  1. Press and hold down Power Key to turn the machine off.

  2. Pull the paper tray completely out of the machine.

  3. If paper is loaded in the paper tray, remove it.

  4. Remove anything that is stuck inside the paper tray.

  5. Tightly wring out a lint-free cloth soaked in lukewarm water, and then wipe the separator pad (1) of the paper tray with it to remove dust.

    Wipe separator pad

  6. Wipe the two pick-up rollers (1) inside of the machine to remove dust.

    Wipe two rollers

  7. Reload the paper and put the paper tray firmly back in the machine.

  8. Turn on the machine.

Ha kérdésére nem talált választ, megtekintette a további GYIK-eket is?

Megnézte a kézikönyvekben?

Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:

Tartalommal kapcsolatos visszajelzés

Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.

1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?

2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?

Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.