MFC-L2740DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Import a CA Certificate

Follow the steps below to import a CA Certificate.

 

  1. Start your web browser.
  2. Type "http://machine's IP address/" in your browser's address bar (where "machine's IP address" is the machine's IP address).
    E.g. http://192.168.1.2/
    • If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.
      E.g. http://SharedPrinter/
       
    • If you enable a NetBIOS name, you can also use the node name.
      E.g. http://brnxxxxxxxxxxxx/
      The NetBIOS name can be found in the Network Configuration Report. Click here to see how to print the Network Configuration Report.
  3. Type a password if you have set one, and then press Right arrow key (Right arrow key).
  4. Click Network.
  5. Click Security.
  6. Click CA Certificate.
  7. Click Import CA Certificate and choose the certificate.

    The Maximum CA Certificates you can store on your Brother machine is two. To avoid configuration failure, we recommend storing one less certificate than allowed, reserving an empty spot in case of certificate expiration. When a certificate expires, you can import a new certificate into the reserved spot and then delete the expired certificate.

    Import CA Certificate.

     

  8. Click Submit.
    The CA certificate is imported to your machine.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-L2740DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.