SDX1200

常見問題&故障排除

常見問題&故障排除

Can the cutting machine cut all materials automatically with the auto blade?

 

The cutting machine can cut automatically, however the material may not be cut cleanly depending on the material or the pattern. In that case, adjust the Cut Pressure setting. 


 

Before making your project, perform a test/trial cut with the same material and check the cut result.
For details on trial cutting, refer to How do I perform trial cutting? (Test Cut).

Adjust the Cutting pressure according to the test/trial cut results.
If the material could not be cut cleanly, refer to the following table, and adjust the setting for the cutting pressure.

Test/Trial Cut results Tips for adjustment
Part of the pattern is not cut. Pressure too light : Touch image in the settings screen once to increase the pressure.
The entire pattern is not cut. Pressure too light : Touch image in the settings screen once to increase the pressure.
There are deep cuts completely through the mat. Pressure too strong : Touch image in the settings screen once to decrease the pressure.

 

 

 

 

To adjust the Cut Pressure setting, touch image in the home screen, and then adjust the setting for Cut Pressure.
image image image

 

 


Otherwise, touch image in the test screen, and then adjust the setting for Cut Pressure in the settings screen.
image image image

 

 

你已經查看過使用說明書了嗎?

如果您需要進一步的協助, 請聯絡Brother客戶服務:

內容意見回饋

請於下方回饋您的意見以幫助我們提升服務的品質

步驟一: 此頁面的資訊對您有幫助嗎

步驟二: 你有任何其他想要提出的意見嗎?

請注意, 此表格僅用做意見回饋使用