SDX1200
![]() |
常見問題&故障排除 |
![](/g/b/img/product/hf_sdx1200eas.jpg)
SDX1200
日期:14.12.2018 ID:faqh00101305_000
Can the cutting machine cut all materials automatically with the auto blade?
The cutting machine can cut automatically, however the material may not be cut cleanly depending on the material or the pattern. In that case, adjust the Cut Pressure setting.
Before making your project, perform a test/trial cut with the same material and check the cut result.
For details on trial cutting, refer to How do I perform trial cutting? (Test Cut).
Adjust the Cutting pressure according to the test/trial cut results.
If the material could not be cut cleanly, refer to the following table, and adjust the setting for the cutting pressure.
Test/Trial Cut results | Tips for adjustment |
Part of the pattern is not cut. | Pressure too light : Touch ![]() |
The entire pattern is not cut. | Pressure too light : Touch ![]() |
There are deep cuts completely through the mat. | Pressure too strong : Touch ![]() |
To adjust the Cut Pressure setting, touch
in the home screen, and then adjust the setting for Cut Pressure.
![image image](/g/b/img/faqend/faqh00101305_000/as_ot/en/2156954/faqh305_fg0003.gif)
![]() |
![]() |
![]() |
Otherwise, touch
![image image](/g/b/img/faqend/faqh00101305_000/as_ot/en/2156954/faqh305_fg0003.gif)
![]() |
![]() |
![]() |
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質