HL-1430
![]() |
常見問題&故障排除 |
How do I clean the Drum Unit?
If the problem is not solved after printing a few pages, the drum unit may have glue from label stock on the OPC drum surface.
Clean the drum unit as follows:
-
Position the print sample in front of the drum unit, and find the exact position of the poor print.
-
Turn the drum unit gear by hand while looking at the surface of the OPC drum.
-
When you have located the mark on the drum that matches the print sample, wipe the surface of the OPC drum with a cotton swab until the dust or paper powder on the surface comes off.
Do not try to clean the surface of the photosensitive drum with a sharp object, such as a ball-point pen, and so on.
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質