HL-1430
![]() |
常見問題&故障排除 |
![](/g/b/img/product/hl1430_as.jpg)
HL-1430
日期:29.01.2014 ID:faq00002256_000
How do I clean the Drum Unit?
If the problem is not solved after printing a few pages, the drum unit may have glue from label stock on the OPC drum surface.
Clean the drum unit as follows:
-
Position the print sample in front of the drum unit, and find the exact position of the poor print.
-
Turn the drum unit gear by hand while looking at the surface of the OPC drum.
-
When you have located the mark on the drum that matches the print sample, wipe the surface of the OPC drum with a cotton swab until the dust or paper powder on the surface comes off.
Do not try to clean the surface of the photosensitive drum with a sharp object, such as a ball-point pen, and so on.