RJ-3055WB
![FAQ et Diagnostic FAQ et Diagnostic](/g/b/shared/img/module/icon_question_33.png) |
FAQ et Diagnostic |
How to install the Roll Holder (PA-RH-002) (Optional)
Movie: How to install the Roll Holder (PA-RH-002) (Optional)
*The video clip is being streamed from YouTube.
-
Make sure that the printer is turned off.
-
Press the Media Compartment Cover Release Tab and lift the Media Compartment Cover.
![Open cover Open cover](/g/b/img/faqend/faqp00100515_000/eu_ot/en/2357097/install_rollholder_01.gif)
-
Insert the Label Spindle into the paper roll as below.
![Insert Label Spindle Insert Label Spindle](/g/b/img/faqend/faqp00100515_000/eu_ot/en/2357098/install_rollholder_02.gif)
-
Install the Fixing Tabs (1) on both sides of the paper roll.
![Install Fixing Tabs Install Fixing Tabs](/g/b/img/faqend/faqp00100515_000/eu_ot/en/2357099/install_rollholder_03.gif) |
1. Fixing Tab |
-
Insert the label roll installed Fixing Tabs and Label Roll Spindle into the printer.
![Insert label roll Insert label roll](/g/b/img/faqend/faqp00100515_000/eu_ot/en/2357100/install_rollholder_04.gif)
-
Make sure that the straight edge of each Fixing Tab is in the opposite side of the Tear Edge.
-
Make sure that the direction of the media is correct.
-
Gently press down on both sides of the Media Compartment Cover, and make sure it is securely closed.
![Close cover Close cover](/g/b/img/faqend/faqp00100515_000/eu_ot/en/2357101/install_rollholder_05.gif)
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Modèles apparentés
RJ-3035B, RJ-3055WB
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.