The self-test printout lists the printer's configuration and available memory, and can indicate if there is any dot damage on the heater component.
Self-test printout
1. Model name
2. Firmware version
3. Firmware checksum
4. Printer serial number
5. Configuration file
6. System date
7. System time
8. Printed mileage (meter)
9. Cutting counter
1. Print speed (inch/sec)
2. Print density
3. Label size (inch)
4. Gap distance (inch)
5. Gap/Black Mark Sensor sensitivity
6. Code page
7. Country code
1. Print darkness
2. Print speed (inch/sec)
3. Label size
4. Control prefix
5. Format prefix
6. Delimiter prefix
7. Printer power up motion
8. Print Head close motion
RS232 Serial Port configuration
RFID frequency band region
1. Printer name
2. Mac Address
3. DHCP
4. IP Address
5. Subnet Mask
6. Gateway
7. RAW Port
Wi-Fi® configuration
1. Number of downloaded files / Total and available memory space
2. Print Head check pattern
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
