A communication error occurs when printing via serial cable (RS-232C).
The communication settings between your computer or host device and the printer may not be configured correctly. With the P-touch Template Settings tool, you can specify the initial printer settings according to the host system environment or the host device that the printer is connected to. You can download the P-touch Template Tools from the [Downloads] section.
<Communication Settings of RJ printer>
Double-click the extracted "P-touch Template Settings.exe" to open the tool.
The main window is displayed.
Click the [Communication Settings…] button.
The Communication Settings window is displayed.
The printer and the computer or host device must have the same baud rate, bit length, parity, and busy control settings.
Settings can be specified for the following parameters for serial communication.
Right click on the printer icon for your Brother machine and choose [Properties] or [Printer properties].
Click [Port] tab and click [Configure Port ...]
(For Windows 7 Users: If all buttons are grayed out, click the [General] tab and click [Change properties]. Enter a password for an administrator and click [Yes].)
Set the same values as the ones set for the printer.
Then click [OK.]
We recommend that you set the flow control of your computer or host device to hardware flow control.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?