CM600
![FAQ et Diagnostic FAQ et Diagnostic](/g/b/shared/img/module/icon_question_33.png) |
FAQ et Diagnostic |
What should I do if lines not in the pattern are being drawn when using the universal pen holder?
If lines not in the pattern are being drawn, as shown below, the height of the pen has not been correctly adjusted.
Adjust the height of the pen, and then draw again.
For details on adjusting the height, refer to “How to use a Universal Pen Holder”.
![image image](/g/b/img/faqend/faqh00100602_000/eu_ot/en/1244316/faqh602_fig00001.gif) |
(1) Line not in pattern |
After the pen has been inserted into the universal pen holder and the height of the pen has been adjusted, do not push in or pull out the pen.
If the height of the pen is changed, it may not draw correctly.
When attaching the pen holder installed with a pen to the machine, be careful not to push down on the pen.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.