CM900
![FAQ et Diagnostic FAQ et Diagnostic](/g/b/shared/img/module/icon_question_33.png) |
FAQ et Diagnostic |
How can I properly emboss without the material tearing?
If the material tore, check the following, and then try again.
Possible Causes |
Solutions |
The embossing pressure is too strong. |
If the embossing pressure is too strong, the tool may press down on the material and tear it.
Decrease the embossing pressure. |
Thin paper is being used as the material to be embossed. |
Embossing is created by pressing the tool against the material. Thin paper may tear.
Use thick paper. |
The embossing speed is fast. |
If the embossing speed is too fast, paper may tear.
Decrease the speed, and then try again. |
Adjust the embossing pressure and inward offset in the settings screen for “Premium functions” or embossing screen.
![image](/g/s/hf/img/snc_faq/en/faqh480_fig0001-en.gif) |
or |
![image](/g/s/hf/img/snc_faq/en/faqh480_fig0002-en.gif) |
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Modèles apparentés
CM260, CM300, CM600, CM700, CM840, CM900
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.