"Before embroidering, make sure embroidery frame is moved as far back as possible and the frame-securing lever is locked down. Then, press "Start/Stop" button to embroidery." message appearing on the LCD.
What does it mean and how do I clear it?
This confirmation message appears after the machine is turned on and the carriage of the embroidery unit has moved to its initial position.
If the operation procedure was correct, the machine will beep once.
If the operation procedure was incorrect, the machine will beep twice or four times.
To turn the alarm on or off, press .
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?