NX-2000
![]() |
FAQ et Diagnostic |
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
This message is displayed when the "Start/Stop" button is pressed while the foot controller is connected.
If the operation procedure was correct, the machine will beep once.
If the operation procedure was incorrect, the machine will beep twice or four times.
To turn the alarm on or off, press .
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.