ADS-3000N

FAQ et Diagnostic

FAQ et Diagnostic
  • Date: 28/07/2016
  • ID: faq00100339_000

Reset the Scheduled maintenance counter

When you clean the pick up roller and reverse roller, you also need to reset the Scheduled maintenance counter by completing the following steps:

NOTE: The screens may differ depending on your operating system and your Brother machine.

Reset the Scheduled maintenance counter only after cleaning the pick up roller and reverse roller.

> Click here to see how to clean the rollers.

  1. Start the ControlCenter application.

    (Windows)
     
    1. Click the ControlCenter4(ControlCenter4) icon in the task tray and select Open from the menu. The ControlCenter4 window appears.
    2. Open the Device Settings.

      [Home Mode]
      Click the Device Settings tab.
      Device Settings
      [Advanced Mode]
      Click the Settings(Settings) icon to access Device Settings.
      Device Settings

    (Macintosh)
     
    1. Click the ControlCenter2(ControlCenter2) icon in the Dock. The ControlCenter2 window appears.
    2. Click the DEVICE SETTINGS tab.
      Device Settings
  2. Click Remote Setup. The Remote Setup window appears.
  3. Select Machine Info. in the navigation tree, select the Scheduled maintenance counter check box, and then click Apply.
    Reset counter for scheduled maintenance alert

FAQ connexes

Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?

Avez-vous consulté les manuels?

Pour toute assistance supplémentaire, contactez le service clientèle de Brother:

Modèles apparentés

ADS-2400N, ADS-2800W, ADS-3000N, ADS-3600W

Commentaires sur le contenu

Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.

Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?

Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?

Ce formulaire a pour seul but de nous faire part de vos commentaires.

Envoyer