ADS-1100W
 |
FAQ et Diagnostic |
Cannot start Remote Setup.
Check the following points to solve the issue:
-
Check if the machine is turned on.
If not, turn on the machine and then try again.
-
Check if the machine is connected to your computer.
If not, connect the machine to your computer and then try again.
-
Check if the machine is in Sleep Mode.
If not, press 
or open the Top Cover, and then try again.
-
Check if an error occurs.
If so, clear all errors and then try again.
-
Check if the machine is scanning documents.
If so, wait until scanning has finished and try again.
-
Check if the machine is in the Settings Menu.
If so, stop configuring the machine from the Control Panel.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Modèles apparentés
ADS-1100W, ADS-1600W
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
