MFC-J6930DW
![]() |
FAQ et Diagnostic |
Copy an ID Card
Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original card size.
![](/g/b/img/faqend/faq00003017_502/eu_ot/en/1408330/GUID-8B30C323-927E-4E0A-86BD-DEE99D5184F2-low.gif)
Make sure the paper size is set to A4 or Letter.
- You may copy an identification card to the extent permitted under applicable laws. For more information, see the Product Safety Guide.
MFC-J3530DW/MFC-J6530DW
- Place your identification card face down near the upper-left corner of the scanner glass.
- 3 mm or greater (top, left)
- 207 mm
- 145 mm
- scannable area
- Press
[Copy].
- Enter the number of copies in one of the following ways:
- Press [-] or [+] on the Touchscreen.
- Press
to display the keyboard on the Touchscreen, and then enter the number of copies using the Touchscreen keyboard. Press [OK].
- Enter the number of copies using the dial pad.
- Press .
- Read and confirm the displayed list of settings you have selected. When you have finished changing settings, press [OK].
- Press [Mono Start] or [Colour Start].The machine starts scanning one side of the identification card.
- After the machine has scanned the first side, turn over the identification card and press [Continue] to scan the other side.
MFC-J3930DW/MFC-J6930DW/MFC-J6935DW
- Place your identification card face down near the upper-left corner of the scanner glass.
- 3 mm or greater (top, left)
- 207 mm
- 145 mm
- scannable area
- Press
[Copy].
- Enter the number of copies in one of the following ways:
- Press [-] or [+] on the Touchscreen.
- Press
to display the keyboard on the Touchscreen, and then enter the number of copies using the Touchscreen keyboard. Press [OK].
- Enter the number of copies using the dial pad.
- Press .
- Read and confirm the displayed list of settings you have selected. When you have finished changing settings, press [OK].
- Press [Mono Start] or [Colour Start].The machine starts scanning one side of the identification card.
- After the machine has scanned the first side, turn over the identification card and press [Continue] to scan the other side.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.