When I send a fax from the machine, an error "not register." or "not registered." is displayed.

The "Fax to server" may be "ON" and this may cause the problem.
To solve the problem make sure that "Fax to server" is "OFF".
There are two ways to change the settings of "Fax to server": By using the control panel and by using the Web Based Management.

Please choose the appropriate way and use the following steps below.

 

Method1: using the control panel

  1. Press Menu.
  2. Select LAN or Network and Fax to Server.
  3. Select Off and then press OK.
  4. Press Stop/Exit.

 

Method2: using the Web Based Management

  1. Start your web browser.
  2. Type "http://machine's IP address/" into your browser (where "machine's IP address" is the machine's IP address).
    - For example: http://192.168.1.2/
  3. Click I-Fax Settings and Fax to Server.
  4. Select Off.

    Web Based Management screen

  5. Click Submit.

Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?

Avez-vous consulté les manuels?

Pour toute assistance supplémentaire, contactez le service clientèle de Brother:

Modèles apparentés

DCP-9055CDN, DCP-9270CDN, MFC-7440N, MFC-7460DN, MFC-7840W, MFC-7860DW, MFC-8860DN, MFC-8870DW, MFC-8880DN, MFC-8890DW, MFC-9120CN, MFC-9320CW, MFC-9460CDN, MFC-9465CDN, MFC-9840CDW, MFC-9970CDW

Commentaires sur le contenu

Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.

Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?

Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?

Ce formulaire a pour seul but de nous faire part de vos commentaires.