HL-2460
FAQ et Diagnostic |
JAM REAR (at paper exit)
|
If a paper jam occurs at paper exit, follow steps below:
-
Open the top cover of the printer.
-
Slowly pull the jammed paper from the paper exit with both hands.
-
Close the top cover of the printer.
If a paper jam occurs behind the face up output tray before the paper exits, follow steps below:
- Open the top cover of the printer.
If a duplex unit is installed on the printer, remove it from the printer. After removing the jammed paper, re-install the duplex unit onto the printer.
-
Open the face up output tray.
-
Slowly remove the jammed paper with both hands.
- Close the face up output tray.
-
Close the top cover of the printer.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.