MFC-7420
 |
FAQ et Diagnostic |
"Document Jam" error appears on the LCD. What should I do?
If the document is jammed, follow the steps below.
If the Document is jammed in the top of the ADF unit...
-
Take out any paper from the ADF that is not jammed.
-
Open the ADF cover.
-
Pull the jammed document out to the left.
-
Close the ADF cover.
-
Press Stop/Exit.
If the Document is jammed under the document cover...
-
Take out any paper from the ADF that is not jammed.
-
Lift the document cover.
-
Pull the jammed document out to the right.
-
Close the document cover.
-
Press Stop/Exit.
If the Document is jammed at the output tray...
-
Pull the jammed document out to the right.
-
Press Stop/Exit.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
