HL-5380DN
 |
FAQ et Diagnostic |
Print overrun
Please do the following:
-
Press Go to print the remaining data in the printer memory. Cancel the print job, if you want to delete the remaining data in the printer memory.
-
Reduce the complexity of your document or lower the print resolution.
-
Add more memory.To learn how to install additional memory, click here.
-
Set page protection to AUTO by using the supplied Windows driver.
-
Change the following settings in the Windows printer driver and try again. The best combination of the settings below will vary depending on your document:
+Graphics *
+TrueType mode *
+Use Printer TrueType® Fonts
* To change these settings, click 'Basic' tab of the printer driver. Select 'Manual' in the 'Print Settings' section. Click 'Manual Setting...'.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
