PT-H200
 |
Preguntas frecuentes y solución de problemas |
How do I set tape margins and what features are they?
To set the tape margins, follow the steps below.
-
Press the [Menu] key (
). -
Press the cursor key (
) to select [Margin], and then press the [OK] key ( 
). -
Press the cursor key ( ) to select [Full/Half/Narrow/Chain Print], and then press the [OK] key ( ).
[Full / Half / Narrow]
For leaving equal margins on both sides of the text.
The margin lengths are as follows:
| Full | Half | Narrow |
 |
 |
 |
[Chain Print]
For printing several ribbons/tapes with minimum margins.
- Enter text.
-
Press the [Print] key (
). [Copies:] appears. -
Press the cursor key ( ) or number keys to select the number of copies.
-
Press the [OK] key ( ). Printing starts, and then the message "Feed OK?" appears.
-
Press the [Esc] key (
) to enter more text. -
Clear the text, enter the text for the next ribbon/tape, and then press the [Print] key ( ).
-
When the message "Feed OK?" appears after the last ribbon/tape is printed, press the [OK] key ( ).
- After the tape is fed, press the cutter lever to cut off the chain of ribbons/tapes.
- When you set [Chain Print], feed the ribbon/tape before using the cutter, otherwise a part of the text may be cut off.
- When you set [Half] or [Narrow], the displayed ribbon/tape length is the length from the printed dots (:) to the end of the label. Cut along the printed dots (:) with scissors.
- To print more than one copy of a label with minimum margins, set the margin to [Narrow].
- Do not pull the tape because this may damage the tape cassette.
En el caso de que no haya obtenido una respuesta a su pregunta, compruebe las preguntas frecuentes adicionales.
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
