Cause

This message is displayed when a button, such as the “Start/Stop” button, is pressed (The foot controller was depressed if it is connected.) while the presser foot was raised.

Solution

Lower the presser foot lever before continuing the operation.

Cause

This message is displayed when the buttonhole lever is down, a stitch other than a buttonhole is selected, presser foot is lowered and a button, such as the “Start/Stop” button, is pressed (The foot controller was depressed if it is connected.).

Solution

Raise the buttonhole lever before continuing the operation.

Cause

This message is displayed when the buttonhole lever is up, a buttonhole stitch is selected, presser foot is lowered and a button, such as the “Start/Stop” button, is pressed (The foot controller was depressed if it is connected.).

Solution

Lower the buttonhole lever before continuing the operation.

Cause

This message is displayed when a button, such as the Reverse stitch button, is pressed while the bobbin winder shaft is moved to the right.

Solution

Move the bobbin winder shaft to the left before continuing the operation.

Cause

This message is displayed when the “Start/Stop” button is pressed while the foot controller is connected.

Solution

Disconnect the foot controller, and then press the “Start/Stop” button. Otherwise, operate the machine by using the foot controller.

Cause

The motor locked up because the thread became tangled.

Solution

Click the following link to see the details of solutions.

E6 message appears on the LCD.

Cause

This message is displayed when the needle plate cover is removed while the machine is still turned on.

Solution

Turn off the machine, and then attach the needle plate cover before continuing the operation.

Cause

If error message “F*” appears in the LCD while the machine is being used, the machine may be malfunctioning. (“*” will be replaced with a number.)

Solution