Innov-is A16
Preguntas frecuentes y solución de problemas |
"E2" message appears on the LCD.
Cause
This message is displayed when an erroneous operation is performed as follows.
- The Start/Stop button is pressed while a stitch other than the buttonhole or bar tack stitch is selected and the buttonhole lever is lowered.
- The Reverse/Reinforcement stitch button is pressed while a stitch other than the buttonhole or bar tack stitch is selected and the buttonhole lever is lowered.
- The foot controller is pressed while a stitch other than the buttonhole or bar tack stitch is selected and the buttonhole lever is lowered.
Solution
Raise the buttonhole lever before continuing the operation.
En el caso de que no haya obtenido una respuesta a su pregunta, compruebe las preguntas frecuentes adicionales.
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.