HL-L5210DW
 |
Preguntas frecuentes y Solución de problemas |
Enable the Brother machine's network interface.
- For certain models, the wireless network connection can be used only when the optional Wireless Module is installed.
- A wired and a wireless network connection cannot be used at the same time. Enable the network connection type you want to use and then disable the other.
Follow the steps below to enable or disable the Brother machine's network interface (wired LAN or wireless LAN).
- Press the Up or Down arrow key to select Network option, and then press OK.
- Press the Up or Down arrow key to select Wired LAN or WLAN(Wi-Fi) option, and then press OK.
- Press the Up or Down arrow key to select Wired Enable or WLAN Enable option, and then press OK.
-
Do one of the following:
- To enable, select On.
- To disable, select Off.
- Press OK or Go.
(For wireless network users)
If a network cable is connected to your machine, disconnect it.
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Preguntas frecuentes relacionadas
- The printer status is Offline or Paused.
- My Brother machine could not be found over the network when I installed drivers on my computer.
- I cannot print on a wireless (Wi-Fi) network (Mac)
- I cannot print on a wireless (Wi-Fi) network (Windows)
- I cannot print using my Brother machine on a wired network (Windows/macOS)
En el caso de que no haya obtenido una respuesta a su pregunta, compruebe las preguntas frecuentes adicionales.
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
