MFC-J6910DW
 |
Preguntas frecuentes y Solución de problemas |
Make my copied images lighter or darker.
You can make your copied images darker or lighter by adjusting your Brother machine's Copy Density setting.
To change the Copy Density setting for your next copy job, follow these steps:
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
<For touchscreen models>
Programming a new default Copy Density setting
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
<For touchscreen models>
To change the Copy Density setting for your next copy job, follow these steps:
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
- Do one of the following:
- For MFC Users:
Press the COPY key to illuminate it.
- For DCP Users:
Go to STEP 2.
- For MFC Users:
- Load your document.
- Use the dial pad to enter the number of copies you want to make (up to 99).
- Press the UP OR DOWN ARROW key to choose Density.
- Do one of the following:
- Press the LEFT ARROW key to make a lighter copy.
- Press the RIGHT ARROW key to make a darker copy.
- Press the LEFT ARROW key to make a lighter copy.
- Press the OK key.
- Press the Black (Mono) Start or Color (Colour) Start key to start copying.
<For touchscreen models>
- Press the COPY key to illuminate it.
- Load your document.
- Use the dial pad to enter the number of copies you want to make (up to 99).
- Press the LEFT OR RIGHT ARROW to display Density and press Density.
- Do one of the following:
- Press the LEFT ARROW to make a lighter copy.
- Press the RIGHT ARROW key to make a darker copy.
- Press the LEFT ARROW to make a lighter copy.
- Press OK.
- Press the Black (Mono) Start or Color (Colour) Start key to start copying.
Programming a new default Copy Density setting
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
- Do one of the following:
- For MFC Users:
Press the COPY key to illuminate it.
- For DCP Users:
Go to STEP 2.
- For MFC Users:
- Press the UP OR DOWN ARROW key to choose Density.
- Do one of the following:
- Press the LEFT ARROW key to make a lighter copy.
- Press the RIGHT ARROW key to make a darker copy.
- Press the LEFT ARROW key to make a lighter copy.
- Press the OK key.
- Press the UP OR DOWN ARROW key to choose Set New Default.
- Press the OK key.
- Do one of the following:
- For MFC Users:
Press 1 to choose Yes.
- For DCP Users:
Press + to choose Yes.
- For MFC Users:
- Press the STOP/EXIT key.
<For touchscreen models>
- Press the COPY key to illuminate it.
- Press the LEFT OR RIGHT ARROW to display Density and press Density.
- Do one of the following:
- Press the LEFT ARROW to make a lighter copy.
- Press the RIGHT ARROW key to make a darker copy.
- Press the LEFT ARROW to make a lighter copy.
- Press OK.
- Press the LEFT OR RIGHT ARROW to display Favorite Settings and press Favorite Settings.
- Press Store.
Set Watermark Copy to Off or Template when storing Favorite Settings. - Press the location where you want to store your setting.
You can choose Favorite:1, Favorite:2 or Favorite:3.
- Do one of the following:
- If you do not want to rename your setting, press OK.
- If you want to rename your setting, follow these steps:
- Press
to delete characters. Then enter the new name (up to 12 characters).
- Press OK.
- Press
- If you do not want to rename your setting, press OK.
- Press the STOP/EXIT key.
En el caso de que no haya obtenido una respuesta a su pregunta, compruebe las preguntas frecuentes adicionales.
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
