HL-L3220CW(E)
 |
Preguntas frecuentes y Solución de problemas |
No Paper T1
There are several reasons that the Brother machine displays No Paper T1.
Check the following points to clear the error message.
Cause 1: The machine failed to feed paper from the indicated paper tray.
Cause 2: Paper dust has accumulated on the surface of the paper pick-up rollers.
Cause 3: The paper you are using may not meet our specifications.
Cause 1: The machine failed to feed paper from the indicated paper tray.
Do one of the following:
- Refill paper in the paper tray indicated on the machine's display (hereinafter called LCD). Make sure the paper guides are set to the correct size.
- If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size.
- Do not overfill the paper tray.
Cause 2: Paper dust has accumulated on the surface of the paper pick-up rollers.
Clean the paper pick-up rollers.
> Click here to see how to clean the paper pick-up roller.
Cause 3: The paper you are using may not meet our specifications.
Check that you use the paper that meets our specifications.
> Click here to see the details of the recommended paper.
En el caso de que no haya obtenido una respuesta a su pregunta, compruebe las preguntas frecuentes adicionales.
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
